| | #1 |
| Guest Posts: n/a
|
Haven't had much time with my '98 coupe this year (traveling too much for work). Had it out today and noticed a clunk in the front suspension, over large bumps, but mostly under braking and turning left (can feel in the floor board). Brought it home and went through the sway bars (lubed them), end links, looking for anything loose and cannot find anything obvious. Just added new end links late last year (upgraded from the plastic ones to the newer style end links). While I had it in the air, checked for any play in the front bearings . . rotors and brakes are new last year and no issues with it earlier this year. . . seems like it just started today after sitting for 3 weeks. Could it be a bad shock or something else? |
|
| | #2 | ||||||||||||||||||||
| Join Date: Nov 2006 Location: Ann Arbor, MI Posts: 640
Thanks: 28
Thanked 32 Times in 32 Posts
|
How are your sway bar bushings? Mine were dry rotted and I got this same noise. Another thought is ball joint. Any good tire/alignment shop can offer some good guidance. | ||||||||||||||||||||
|
1985 Z51 4+3 trans rebuilt 5.7 TPI,(.10 over) w/ CompCams 12-262-4, 52MM Throttlebody, underdrive pulleys, reworked heads, Hypertech Thermomaster chip, & cat back exhaust
| |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #3 | ||||||||||||||||||||
| Spotter Join Date: Nov 2006 Location: San Jose CA. Posts: 1,006
Thanks: 26
Thanked 38 Times in 37 Posts
|
Possible lower contol arm bolt or a bad control arm bushing ? get under there and look close. | ||||||||||||||||||||
|
86 & 99 auto Z51's AMA Lifetime Member NASCAR Winston Weekly Racing Series Track Championship Crew Member (Dirt Track) NASCAR Dodge Weekly Racing Series Track Championship Crew Member (Pavement) NASCAR Whelen All American Weekly Series Track Championship Crew Member (Pavement) NASCAR Whelen All American Weekly Series California State Championship Crew Member (Pavement) | |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #4 |
| Guest Posts: n/a
|
Thanks for the suggestions . . .I think I am going to take it in to a tire/alignment shop and get it checked out, I am starting to suspect a bad ball joint since everything else checks out okay.
|
|
| | #5 | ||||||||||||||||||||
| Join Date: Nov 2006 Location: SoCal Posts: 1,473
Thanks: 18
Thanked 55 Times in 55 Posts
|
# miles?
| ||||||||||||||||||||
|
2004 Z06/Z16 1996 LT4 Coupe (SOLD) 2006, 2009, 2010, 2011 SCCA Solo Regional Champion Check out my DIY videos http://www.youtube.com/user/1947froggy?feature=mhee | |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #6 |
| Guest Posts: n/a
|
58,000 miles . . . . . took it in to an Tire/alignment shop and it turns out one of the front sway bar links had failed. Quick trip to buy a new link and install it and the clunk is gone! Everything else on the front and rear supension is solid, no other issues.
|
|
![]() |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Drivetrain clunk | TBone | C4 Technical Issues | 11 | 08-31-2010 05:21 pm |
| Squeak in front suspension | FastEddie97 | C5 Technical Questions | 2 | 09-11-2008 09:55 pm |
| Intermittent Clunk/Thud Noise | jjgcars | C5 Technical Questions | 5 | 08-14-2008 03:43 pm |
| More Suspension Questions | ALMSGT1 | C5 Technical Questions | 1 | 06-12-2008 06:26 am |
| Clunk on Auto Downshift | 346sfi | C4 Technical Issues | 4 | 06-28-2007 01:43 pm |