| | #1 | ||||||||||||||||||||
| CM Moderator Join Date: Nov 2006 Location: The Motor City! Birthplace of the 2009 ZR1 baby! Posts: 1,115
Thanks: 4
Thanked 54 Times in 51 Posts
|
Just got back from being out of town and I thought I would post here just to see if someone can help me. My 2003 Vibe drivers side window fell into the door a few weeks ago. I took the door apart and one of the two cheap plastic clips that bolt the window to the arm or I assume the regulator broke off. Since you cannot replace the clip and glue a new one onto the glass, the entire window has to be replaced. I go buy a new window and install it. Over the weekend my wife tells me as she rolled the window up it made a nasty crack! I just took the door apart again and find the same plastic clip broke! I remembered when I installed the new window and one arm appeared to twist itself as the window got to the completely closed position. I thought this was odd but accepted it as normal... Now I am thinking the window regulator needs to be replaced because it should not be twisting as it is. Can anyone comment on what is going on before I buy a new window for $127 and replace the second one that lasted only 4 weeks! ![]() Thanks, | ||||||||||||||||||||
| Now go play with your tools! 1998 6-speed Coupe. Z06 exhaust, Z06 sway bars, C6 Z06 Shifter, LS6 Intake Manifold, K&N FIPK, Vararam Velocity Stack, stainless steel brake lines, Borla X pipe, Z06 shocks. SAE Dyno Numbers 330 RWHP/340 RWTQ | |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #2 | ||||||||||||||||||||
| Master Technician Join Date: Nov 2006 Location: south of boston Posts: 171
Thanks: 4
Thanked 21 Times in 21 Posts
|
my guess would be the regulator got bent when the clip broke last time and you tried to raise and lower the window .I would say a new regulator will be needed . I could be wrong but i thought you could by the clips I will check Steve
| ||||||||||||||||||||
| | | ||||||||||||||||||||
| | #3 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Nov 2006 Location: Phila burbs Posts: 469
Thanks: 88
Thanked 36 Times in 35 Posts
|
Bummer nothing worse then fixing the same thing twice it should have never happened in the first place. Remember the days when parts weren't made of plastic.. Junk yard ...whenever I cannot get a peice without buying the whole enchilada it is time to visit the junk yard. or is it now a "recycle facility" Best of Luck
| ||||||||||||||||||||
| | | ||||||||||||||||||||
| | #4 | ||||||||||||||||||||
| CM Moderator Join Date: Nov 2006 Location: The Motor City! Birthplace of the 2009 ZR1 baby! Posts: 1,115
Thanks: 4
Thanked 54 Times in 51 Posts
|
Yeah Foot I wish I could find the clips but GM does not offer them and the glass place I talked to does not. The clips are glued to the window, so if I did find the clip, I would need the proper glue too. I cannot do anything until I find the cause and like Steve says I too think it is the regulator. I mean what else could it be? Unless Steve can find the clips unlike my search... | ||||||||||||||||||||
| Now go play with your tools! 1998 6-speed Coupe. Z06 exhaust, Z06 sway bars, C6 Z06 Shifter, LS6 Intake Manifold, K&N FIPK, Vararam Velocity Stack, stainless steel brake lines, Borla X pipe, Z06 shocks. SAE Dyno Numbers 330 RWHP/340 RWTQ | |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #5 | ||||||||||||||||||||
| Master Technician Join Date: Nov 2006 Location: south of boston Posts: 171
Thanks: 4
Thanked 21 Times in 21 Posts
|
well I was wrong it was another car that you cold get the clips for but you might try toyota and see what they have it is basicly a Matrix you never know may be worth the pone call sorry for the bum steer Steve
| ||||||||||||||||||||
| | | ||||||||||||||||||||
| | #6 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Nov 2006 Location: Phila burbs Posts: 469
Thanks: 88
Thanked 36 Times in 35 Posts
|
Gotta be one in a salvage yard where you could get the whole assembly
| ||||||||||||||||||||
| | | ||||||||||||||||||||
![]() |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fuse issue? Electrical Issue? HELP NEEDED!!! | @lien@ted | C5 Technical Questions | 10 | 12-08-2010 01:21 am |
| Power Window Issue | koch | C5 Technical Questions | 11 | 06-05-2009 05:48 am |
| 2008 Pontiac G8 to start at $27,595 V8 under 30 g's | JBsZ06 | GM Reviews | 2 | 10-05-2007 07:41 am |
| Next-Gen Pontiac Performance | JBsZ06 | Editor JB's Automotive Picks | 0 | 08-01-2007 06:46 am |