3 months later bcm w/issues

[b murph]

After 3 months i just got my 01/Z06 back from a private mechanic with a rebuilt BCM. She is running fine, but i am still getting the ( service column lock and pull key and wait 10sec.) Is there any way to get these massages out, or will it figure it out on it own after a while. I'm not very happy with these results. ????

[c4c5specialist]

HI there,

If the issue was repaired, you would NOT see these messages.

There is still something wrong.

Allthebest, c4c5

[b murph]

Is there anything I can do to rectify this problem ??

[c4c5specialist]

Hi there,

Disconnect your negative battery cable for 2 mins and then reconnect and torque to 11 ft lbs.

Let us know what messages you see and check for codes in ALL MODULES>

Post them here.

Allthebest, c4c5

[b murph]

Will do tomorrow. Keep you posted. Thank you for your concern.

[b murph]

Disconnected battery for 2 min. After start up, same messages on the DIC No codes at all. I am starting to think all that was done was to over ride the fuel shut off. ????