cv boot

[ron41]

today found grease on the inside of left rear wheel
have a 2006 base LS2.
found a slit in cv boot removed the outer shaft from hub
so the question is how to get the back shaft from the rear end
do you have to take the plate off on the side of the rear end to get it off
need your help have never done this before
thanks for your help guys
ron41

[ron41]

Originally Posted by ron41

today found grease on the inside of left rear wheel
have a 2006 base LS2.
found a slit in cv boot removed the outer shaft from hub
so the question is how to get the back shaft from the rear end
do you have to take the plate off on the side of the rear end to get it off
need your help have never done this before
thanks for your help guys
ron41

i got it to come out justed had to pull harder
thanks for all the help you guys have given me for all the troubles i have hade before once again thank you
ron41

[NORTY]

ron41~ Was the wheel bbl grease found during your inspection of the rear of the car trying to locate the "popping" sound?

If so, then good job taking care of a small problem that becomes a "bigger" problem!

[ron41]

yes i found the boot split and grease all over the wheel and every thing else removed the axle cleaned the bearing replaced the grease no more popping noise
thinks for the help
ron41