| | #1 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Jul 2011 Posts: 13
Thanks: 0
Thanked 1 Time in 1 Post
|
Can I get a wiring diagram for the turn signal circuit for my 2002 conv? Junkman states to instal a relay bypass to correct my problem but I wanted to confirm that it is needed. My problem is the right turn signal arrow does not allways flash but the relay clicks and the right side lights are flashing normally. It sounds to me like the IPC is not processing the imformation of the relay that he states has a problem, maybe i can clean or correct the connection to eliminate this concern. Thanks, doug | ||||||||||||||||||||
| | | ||||||||||||||||||||
| | #2 | ||||||||||||||||||||
| Devil Dog Join Date: Jul 2007 Location: Kentucky Posts: 519
Thanks: 3
Thanked 54 Times in 46 Posts
|
Here you go. You won't need the rear lamp schematics after seeing these. You can pull the hazard switch out and clean it but that probably won't fix anything because the hazard switch had a design flaw. I don't know when it was changed but I have a newer designed switch. Changing that switch is a bear of a job if you do it yourself. The cost of the bypass cable and the hazard switch are a wash but the labor is night and day.
| ||||||||||||||||||||
|
"Marines - Making the other guy die for his country for over 200 years."
| |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #3 | ||||||||||||||||||||
| CM Moderator Join Date: Nov 2006 Location: The Motor City! Birthplace of the 2009 ZR1 baby! Posts: 1,115
Thanks: 4
Thanked 54 Times in 51 Posts
|
Junkman, is this the by-pass? Just curious as to what one it is for this issue. Corvette C5 LED Hyper-Flash Fix | ||||||||||||||||||||
| Now go play with your tools! 1998 6-speed Coupe. Z06 exhaust, Z06 sway bars, C6 Z06 Shifter, LS6 Intake Manifold, K&N FIPK, Vararam Velocity Stack, stainless steel brake lines, Borla X pipe, Z06 shocks. SAE Dyno Numbers 330 RWHP/340 RWTQ | |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #4 | ||||||||||||||||||||
| Devil Dog Join Date: Jul 2007 Location: Kentucky Posts: 519
Thanks: 3
Thanked 54 Times in 46 Posts
|
That is it. It is used to fix the hyper-flash issue that you get when going to LED tail lights (because the car thinks the bulbs are blown due to the significant less current draw of the LED's). It bypasses the hazard switch which fixes both the bad hazard switch issue and the hyper-flash issue. That's $20 cheaper than Corvette Enhancements sells it for. Good find.
| ||||||||||||||||||||
|
"Marines - Making the other guy die for his country for over 200 years."
| |||||||||||||||||||||
| | | ||||||||||||||||||||
| | #5 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Jul 2011 Posts: 13
Thanks: 0
Thanked 1 Time in 1 Post
|
Thank youk, when I get a minute I will do come checking. I will check ck 15 for light control voltage while working the right turn signal.
| ||||||||||||||||||||
| 2002 W/Borla Exhaust | |||||||||||||||||||||
| | | ||||||||||||||||||||