| | #1 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Jul 2011 Location: Southern Illinois Posts: 11
Thanks: 3
Thanked 0 Times in 0 Posts
|
Just had a new oil pressure switch installed and when I got the car back it was reading around 50psi. The switch that I put in was the standard ignition switch PS-308. Is 50 psi normal for a 99, C5, 65,000.
| ||||||||||||||||||||
| | | ||||||||||||||||||||
| | #2 |
| Corvette Enthusiast |
50 PSI sounds nice too me. I'm using a PS308 and when its cold, it runs 50 and above till it warms up. Due to my extreme mileage on my '99, I'm seeing summer PSI of about 21 at hot and idle.
|
| | |
| The Following User Says Thank You to dgrant3830 For This Useful Post: | ultraclassic01 (09-22-2011) |
| | #3 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Jul 2011 Location: Southern Illinois Posts: 11
Thanks: 3
Thanked 0 Times in 0 Posts
|
Thanks for your information. I was ready to turn around an ask the mechanic "whats up with this". On the way home once the car did warm up the gauge did go just above 40. Thanks again dgrant3830.
| ||||||||||||||||||||
| | | ||||||||||||||||||||
| | #4 | ||||||||||||||||||||
| rocket8189 Join Date: Oct 2009 Location: Oklahoma City Posts: 100
Thanks: 0
Thanked 6 Times in 6 Posts
|
Gentlemen, I have a beautiful '04 C6 Z06 w/93K, way above 50 until warm, over 40 on normal days, just under 40 on Oklahoma hot days/idle. I've seen a couple runs @ this issue on this site and I think we are all good. I was kinda surprised on what the mechanics here said was good and expected by the engineers, lower than I would have thought but, hey, they are the pros. | ||||||||||||||||||||
| | | ||||||||||||||||||||
| | #5 | |||||||||||||||||||||
| Master Technician Join Date: Nov 2006 Location: Washington State Posts: 1,145
Thanks: 9
Thanked 106 Times in 106 Posts
| Quote:
Your oil pressure is fine. Normally you will see 50 psi when the engine is warming up and above hot idle rpm's. At hot idle you will probably see around 25-35 psi. | |||||||||||||||||||||
|
Master Technician 20 year ASE Master Certified Tech 1998 black 6spd convertible | ||||||||||||||||||||||
| | | |||||||||||||||||||||
| | #6 |
| Corvette Enthusiast |
My lower PSI is due to the mileage, which I expect. Since I'm at 324K miles, lower is normal. I'm still running 5W-30 Mobil1. At some point, I'll have to rebuild the bottom end. Not sure if to just have the crank re-machined and newly sized bearings or buy a new crank and put in the OEM bearings from GM.
|
| | |
![]() |
| Tags |
| display, oil pressure, sending unit |
| Thread Tools | |
| Display Modes | |
| |