09-26-2011, 05:06 pm
| #1 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Sep 2007 Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|  SIR hiccup?
Hello About C6 2005, LS2 automatic All of a sudden the airbag warning lamp goes on and stays on. Connecting a Tech2 reading DTC's: B0051 and B1000. B1000: (not explained in the service manual) passed last test, only history B0051: indicates 'Deployment Commanded', although no collision or damage happened to the car. NO airbags went off either. According to the service manual I should replace the SDM, but as mentioned nothing really happened. As replacing the SDM is quite expensive ($400) I would like to know what other options are available to cure this systems huccup. Thanks for any advice, Jan | ||||||||||||||||||||
|  | ||||||||||||||||||||
|
09-27-2011, 12:20 pm
| #2 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Jul 2009 Location: Carlsbad, Ca. Posts: 418
Thanks: 13
Thanked 30 Times in 30 Posts
|
Lately, mine has been going "on" while the car is loaded up laterally. Then goes off when it unloads. 2006 Z06 (50,500 miles.) Noticed it about 2 months ago. I figure it's a wire moving around.
| ||||||||||||||||||||
|
| | ||||||||||||||||||||
|
10-05-2011, 01:53 pm
| #3 | ||||||||||||||||||||
| Corvette Enthusiast Join Date: Sep 2007 Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
I my situation, the warning stays on. Unlikely that is a wire moving around. I want to know if in my case I have to replace the SDM. Thanks, Jan | ||||||||||||||||||||
|
| | ||||||||||||||||||||
Linear Mode
